Practical continuous ventilation with vermegjenvinner

 

● Built-in cross-flow heat exchanger
● More fresh air in the house while saving energy
● Two fan speeds
● Continuous pressure balance
● Can be used for ventilation of one or more rooms
● Very easy cleaning of the heat exchanger
● Heat recovery: approx. 75%
● Uses very silent fan


Poor air quality can cause many problems in the workplace and at home. Studies show that general discomfort due to poor indoor air quality is critical for human well-being, performance and concentration. Acquisition of good mechanical ventilation and regulation ensures excellent conditions for comfortable and productive lives.

MINI VENT Lossnay system has perfected the recovery of heat energy that is otherwise lost. In winter Lossnay reduces total energy consumption and costs for heating by removing stale air, and in this process heat the fresh air supplied to the indoor environment (supply). In summer, the unit maintain a lower temperature inside if it basically is colder in the house leek out. By utilizing this energy Lossnay can save up to 30% of costs for heating and cooling.


Effective ventilation

Lossnay simultaneous supply of fresh air and removal of exhaust and ventilation. Conventional ventilation systems do not work effectively in airtight buildings because of the pressure they generate. In addition, to provide ventilation in the environment eg. radon and fungal spores.

Good heat recovery

Total heat recovery characteristics Lossnay ensures comfortable temperature in the room. Saved thermal energy helps to reduce utigifter for heating in the winter.

assembly instructions in PDF

VL-100EU5-E 1

MINI VENT Lossnay

Manual in PDF

bestilling

Good soundproofing

Since Lossnay core (heat exchanger unit - see photo below) is made from specially treated paper and side air channels in it are young, the very core of very good sound reduction and is therefore suitable for all types of rooms including bedrooms.

Heat exchanger effect principle

Hemeligheten of Lossnay system lies in the cross-flow plate heat exchanger structure of the device. The partitions of this is made from specially treated paper that separates the inlet and exhaust and ensure that only fresh air is supplied to the indoor environment. The energy recovered from the exhaust air, which means the improvement of energy efficiency.

Technical data:

● Heat recovery: approx. 75%
● Capacity at high / low speed: 105/65 m3/hour
● Current consumption at high / low speed: 26/23 W
● Sound at high / low speed: 39/29 dB
● El. connection: 220 V
● Wall implementation: two round holes (Ø 9 cm)
● Dimensions: spesifikasjoner.pdf